sinox
If you want to keep your filter settings, please use the back button of your browser!
PVC, Extrusion, K-value: 67 ± 3
Details
PVC, Extrusion, K-value: 57 ± 3
PP, Extrusion, MFR: 0.7-1.7
PVC, Injection moulding, Extrusion
PVC, Extrusion
PP, Injection moulding, Extrusion; MFR: 5-8
PP, Extrusion; MFR: 0.7-1.7
HDPE, Blow moulding, Injection moulding, MFR: 3-4 at 2,16kg
HDPE, Extrusion, Injection moulding, ESD Electrically conductive, MFR: 1 at 2,16kg
PP, Extrusion, Injection moulding, ESD Electrically conductive, MFR: 0,1 at 5,00kg
PP, Extrusion, ESD Electrically conductive, MFR: 2 at 2,16kg
PP, Extrusion, Injection moulding, ESD Electrically conductive, MFR: 4 at 2,16kg
PP, Injection moulding, ESD Electrically conductive, MFR: 10 at 2,16kg
PP, Injection moulding, ESD Electrically conductive, MFR: 20 at 2,16kg
HDPE, Injection moulding, MFR: 6-8 at 2,16kg
LDPE, Extrusion, Injection moulding, Compounding, MFR: 2.6 at 2,16kg
HDPE, Blow moulding, Extrusion, MFR: 0.5 @5kg
HDPE, Blow moulding, Extrusion; MFR: 0.21
HDPE, Injection moulding
HDPE, LDPE, Compounding, Extrusion; MFR: 3.2-4.2
HDPE, Compounding, Extrusion; MFR: 2.629 @5kg
PP, Injection moulding, MFR: 8-15 at 2,16kg
HDPE, Injection moulding, MFR: 5-6 at 2,16kg
HDPE, blow moulding, extrusion
HDPE, blow moulding, extrusion, MFR: 0.2-0.5 @2.16kg
HDPE, blow moulding, extrusion, MFR: 6-8 @21.6kg
HDPE, blow moulding, MFR: 2.48 @5kg
HDPE, extrusion, blow moulding, MFR: 1 @5kg
HDPE, injection moulding
HDPE, extrusion
HDPE, blow moulding, extrusion, MFR: 0.3-0.5 @2.16kg
HDPE, blow moulding, extrusion, MFR: 1-2 @2.16kg
HDPE, blow moulding, extrusion, MFR: 1-2 @5kg
PP, injection moulding, MFR: 21.1
PP, injection moulding, MFR: 14.6
PP, extrusion, MFR: 10
PP, injection moulding, compounding, MFR: 15-20 @2.16kg
PP, injection moulding, compounding, MFR: 20-30 @2.16kg
PP, injection moulding, compounding, MFR: 15-25 @2.16kg
PP, injection moulding, compounding, MFR: 6-9 @2.16kg
PP, injection moulding, compounding, MFR: 18-23 @2.16kg
PP, injection moulding, compounding
HDPE, blow moulding, extrusion, film blowing, MFR: 0.25-0.35
HDPE, blow moulding, extrusion, film blowing, MFR: 0.38
HDPE, injection moulding, MFR: 4 at 2,16kg
HDPE, injection moulding, MFI: 3.5 at 2,16kg
HDPE, blow moulding, extrusion, MFI: 0.25-0.50 @2,16kg
HDPE, extrusion, MFI: 1.1 @2,16kg
HDPE, extrusion, MFI: 1.35 @2,16kg
HDPE, extrusion, film blowing, blow moulding, MFI: 1-1.4 @5kg
HDPE, extrusion, film blowing, blow moulding, MFI: 1.1-1.5 @5kg
HDPE, Extrusion, Film blowing, Blow moulding, Injection moulding, MFR: 0.3 at 2,16kg
HDPE, Extrusion, Film blowing, Blow moulding, Injection moulding, MFR: 0.3, 0.6 at 2,16kg
HDPE, Extrusion, Blow moulding, MFR: 0.4-1.5 at 2,16kg
HDPE, Extrusion, Blow moulding, MFR: 0.3-1.3 at 2,16kg
HDPE, Film blowing, Blow moulding, MFR: 0.94-0.96 at 2,16kg
HDPE, Injection moulding, MFR: >2@2,16kg
PP, Extrusion, Film blowing, Blow moulding, Injection moulding, MFR: 6.6 at 2,16kg
LLDPE, Film blowing, MFR: 2-3 at 2,16kg
LLDPE, Film blowing, MFR: 2.5-3 at 2,16kg
PC, Extrusion, Injection moulding, MFR: 8.2 at 2.16kg
PC, Compounding, Injection moulding, MFR: 25 @1.2kg
PC, Compounding, Extrusion
PC, Compounding, Injection moulding
PC, Extrusion, Injection moulding, MFR: 9.0 at 1,2kg
PC, Extrusion, Injection moulding, Compounding, MFR: 9.0 at 1,2kg
PC, ABS, Injection moulding
PET, Blow moulding, IV: 0.75
PET, Blow moulding, extrusion, IV: 0.7
PET, Extrusion, Blow moulding
PET, Extrusion, Blow moulding, IV: 0.78
PET, Blow moulding, Extrusion, IV: 0.78
PET, Blow moulding, Extrusion, IV: 0.8
PET, Blow moulding, Extrusion, IV: 0.78-0.82
HDPE, Extrusion, MFR: 0.83
PP, Injection moulding, compounding, MFR: 10g/10min at 2,16kg
PP, Injection moulding, extrusion, MFR: 4-6g/10min at 2,16kg
[Details]
PE/PP, Injection moulding, Compounding MFI: 2-2.928 at 2,16kg
PE/PP, Injection moulding, MFI: 12-25 at 2,16kg
PP, Injection moulding, MFR: 15-60 at 2,16kg
PP, Injection moulding, MFR: 46-59 at 2,16kg
PP, Film blowing, Compounding, MFR: 3-7 @2,16kg
PP, Injection moulding
PP, Injection moulding, MFR: 15 at 2,16kg
PP, Injection moulding, film blowing, extrusion, MFR: 9 at 2,16kg
PP, blow moulding, film blowing, extrusion, MFR: 3 at 2,16kg
PP, injection moulding, MFR: 30 at 2,16kg
PP, injection moulding, MFR: 10 at 2,16kg
PP, injection moulding, MFR: 7-10 at 2,16kg
PP, injection moulding, MFR: 10-15 at 2,16kg
PP, injection moulding, MFR: 58 at 2,16kg
PP, injection moulding, MFR: 18 at 2,16kg
PP, injection moulding, MFR: 18-25 @2,16kg
PP, injection moulding, MFR: 32 @2,16kg
PP, injection moulding, MFR: 46 @2,16kg
PP, blow moulding, film blowing, extrusion, injection moulding, MFR: 6-8 at 2,16kg
PP, Injection moulding, MFR: 3.2 at 2,16kg
PP, Injection moulding, MFR: 15-20 at 2,16kg
PP, Injection moulding, MFR: 25 at 2,16kg
PP, Injection moulding, MFI: 7-10 @2.16kg
PP, Injection moulding, MFR: 48 at 2,16kg
PP, Injection moulding, Compounding
PP, Injection moulding, Compounding, MFR: 21,9
PP, Injection moulding, MFR: 10-13
PP, Injection moulding, MFR: 7-9
PP, Injection moulding, MFR: 5.5 @5kg
PO, Injection moulding, Compounding
PO, Injection moulding, Compounding, MFR: 3-6
PP, Injection moulding, MFR: 3.5 at 2,16kg
PP, Injection moulding, MFR: 8-12
PP, Injection moulding, Compounding, MFR: 50
PP, Injection moulding, MFR: 60
HDPE, PP, Injection moulding
PP, Extrusion, MFR: 3.35 @2.16kg
PP, MFR: 3-4, Extrusion, Compounding
HIPS, Extrusion, Compounding
PET, Compounding, Film blowing, Injection moulding, IV: 0.60
PET, Extrusion, Blow moulding, Injection moulding, IV: 0.83
PET, Injection moulding, MFR at 2,16kg: 90
PET, Injection moulding, MFR at 2,16kg: 50
PET, Injection moulding, MFR at 2,16kg: 30
PET, Injection moulding, MFR at 2,16kg: 35
HDPE, Extrusion, MFR: 0.7 – 0.8
HIPS, Compounding, Electrically conductive
PP, Compounding, Electrically conductive
LDPE, Blow moulding, Injection moulding; MFR: 0.78 at 2.16kg, 2.88 at 5.00kg
LDPE, Film blowing, Extrusion; MFI: 0.3-0.7 at 2.16kg
LDPE, Film blowing; MFR: 1-1.5 at 2.16kg
LDPE, Film blowing; MFR: 0.92-0.94 at 2.16kg
LDPE, Film blowing; MFR: 3-7 at 2.16kg
LDPE, Film blowing; MFR: 0.20-0.75 at 2.16kg
LDPE, Injection moulding, MFR: 19-25 at 2.16kg
LDPE, Injection moulding, MFR: 22 at 2.16kg
LDPE, LLDPE, Film blowing; MFR: 0.85, 0.98, 2.75
LDPE, Film blowing; MFR: 0.93
LDPE, Film blowing; MFR: 1
LDPE, Film blowing; MFR: 0.50-0.75 at 2.16kg
LLDPE, film blowing
LDPE, film blowing, extrusion
LDPE, LLDPE, film blowing, MFR at 2,16kg: 1-2
LDPE, LLDPE, film blowing, MFR at 2,16kg: 0,85
LLDPE, film blowing, MFR at 2,16kg: 1.1
LLDPE, film blowing, MFR: 1.1 at 2,16kg
PP, Injection moulding, MFR: 20 at 2,16kg
PP, Injection moulding, MFR: 11 at 2,16kg
PP, Injection moulding, MFR: 30+ at 2,16kg
ABS, Injection Moulding, MFR: 25@10kg, Impact Strength: 12 kJ/m²
ABS, Injection Moulding, MFR: 25@10kg, Impact Strength: 150 J/m
ABS, Injection Moulding, MFR: 20@10kg, Impact Strength: 15 kJ/m²
ABS, Injection Moulding, MFR: 20@10kg, Impact Strength: 11 kJ/m²
ABS, Extrusion
ABS, Injection Moulding, MFR: 22-26@10kg, Impact Strength: 12-14 kJ/m²
ABS, Injection Moulding, MFR: 22-25@10kg, Impact Strength: 12-15 kJ/m²
ABS, Injection Moulding, MFR: 20-22@10kg, Impact Strength: 16-20 kJ/m²
ABS, Injection Moulding, MFR: 20-25@10kg
ABS, Injection Moulding, MFR: 22-24@10kg
ABS, Injection Moulding, MFR: >17@10kg, Impact Strength: >10 kJ/m²
ABS, Injection Moulding, MFR: >35@10kg
ABS, Injection Moulding, MFR: >27@10kg, Impact Strength: 8-10 kJ/m²
ABS, Injection Moulding
PS/ABS Regrind
HIPS, Injection Moulding, MFI: 5@5kg, Impact Strength: 8 kJ/m²
HIPS, Injection Moulding, MFI: 14.8@5kg, Impact Strength: 6.5-7.5 kJ/m²
HIPS, Injection Moulding, MFI: 5-7@5kg, Impact Strength: 8-10 kJ/m²
HIPS, Injection Moulding, MFR: 4-6@5kg, Impact Strength: 10-13 kJ/m²
HIPS, Injection Moulding, MFI: 3.5-5@5kg, Impact Strength: 8-9 kJ/m²
HIPS, Injection Moulding, MFR: 4-6 @5kg
HIPS, Injection Moulding, MFR: 6-8 @5kg, Impact Strength: >5.5 kJ/m²
HIPS, Injection Moulding, MFR: 6-7 @5kg, Impact Strength: >6 kJ/m²
HIPS, Injection Moulding, MFR: 7-9 @5kg, Impact Strength: >4 kJ/m²
HIPS, Extrusion
PA6, Injection moulding, extrusion, MFR: 21.8 @2.16kg
PA6, Injection moulding, extrusion, MFR: 14.09 @2.16kg
PA6, Injection moulding, extrusion, MFR: 29.74 @2.16kg
PA66, Compounding
SAN, Compounding, Injection moulding
HDPE, Blow moulding
HDPE, Extrusion, MFR: 0.78 at 5,00kg
HDPE, Compounding, Extrusion, Electrically conductive, MFR: 0.78 at 5,00kg